 |
 |
 |
|
|
|
Glueing Instructions
Products:
EUROFLEX® Impact Protection Slabs
EUROFLEX® Protect
EUROFLEX® Elephant/Rhino
EUROFLEX® Letter & Pavement Slabs
EUROFLEX® Riding-Toy Slabs
EUROFLEX® Sports Pavement Slabs
EUROFLEX® Elastic Pavement Blocks (including synthetic turf slabs / slabs with surface graphics)
EUROFLEX® Paving Block Tile
EUROFLEX® Lawn Edging
EUROFLEX® Step Blocks
EUROFLEX® Edge and Corner Slabs
EUROFLEX® Edge Protectors
EUROFLEX® Perimeter Panels
Required quantity of glue:
1 cartridge (310 ml) for every 3 - 4 m of joint length glued.
Type of glue:
elastic 1-component polyurethane adhesive cement
e.g. Ottocoll P 83 and Ottocoll M 500
(Otto-Chemie, Fridolfing/Germany, Tel. +49-(0)8684-908-0)
Other purchasing sources: specialist retailers or your
nearest KRAIBURG representative.
1. Preparation:
The surfaces must be clean, dry and free
of grease. Check adhesion to and compatibility with plastic
and painted surfaces before installation.
2. Glueing:
Apply adhesive cement from application pistol
onto the substrate. The required layer thickness is dependent
on the materials being joined. Within 10 minutes, put
the upper material in place and apply contact pressure.
Due to the pasty consistency of the cement, we recommend
maintaining contact pressure until curing is complete.
The required curing time is dependent on the layer
thickness and the humidity of the ambient air.
 Download...
|
|
|
|
 |
|
|
|
Gummiwerk KRAIBURG RELASTEC GmbH
Fuchsbergerstrasse 4
D-29410 Salzwedel
Fon: +49-(0)8683-701-145
Fax: +49-(0)8683-701-4145 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
